{"product_id":"uni-carbon-fibre-30mm-1","title":"Uni Carbon Fibre 30mm","description":"\u003cp\u003e\u003cspan\u003e\u003cstrong\u003e\u003cspan lang=\"EN-US\"\u003eWidth: \u003c\/span\u003e\u003c\/strong\u003e\u003cspan lang=\"EN-US\"\u003e3\u003c\/span\u003e\u003cspan lang=\"EN-US\"\u003e0\u003c\/span\u003e\u003cspan lang=\"EN-US\"\u003emm | 1.18”\u003cstrong\u003e\u003cbr\u003e\u003c\/strong\u003e\u003cstrong\u003eColour: \u003c\/strong\u003eBlack\u003cstrong\u003e\u003cbr\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003e\u003cspan lang=\"EN-US\"\u003eCarbon Tape\u003c\/span\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan lang=\"EN-US\"\u003eThe Uni Carbon Fibre Tapes are custom made (purpose built) for surfboard production and have become the industry standard for strengthening the rails and tail area of surfboards, the area’s most affected by high impact and back foot pressure.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cspan lang=\"EN-US\"\u003eThe Carbon Hybrid Tapes uses a blend of woven non-crimp 3K Carbon flat-tow twine. This construction ensures a highest strength to flex ratio and doesn’t effect on the natural flex of the board. Moreover, the use of Uni-Directional weave pattern provides a high impact strength and allows for a kinetic flex pattern that will spring the tail back to its natural curve which creates extra drive and speed. \u003c\/span\u003eThe unidirectional tapes consist of a plain weave construction with at least 80% of the fabric weight in the 0° or Warp direction. This is used to add directional stability to structures in one specific direction.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003e\u003cspan lang=\"EN-US\"\u003eIndustry Uses:\u003c\/span\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003e\u003cem\u003e\u003cspan lang=\"EN-US\"\u003eTail Rails\u003c\/span\u003e\u003c\/em\u003e\u003c\/strong\u003e\u003cspan lang=\"EN-US\"\u003e Manufactures place the Carbon Tapes on the back rail of surfboards to prevent the tails from shattering, strengthening the deck from foot compressions and prventing rail cancer.\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003e\u003cem\u003e\u003cspan lang=\"EN-US\"\u003eBottom of the board \u003c\/span\u003e\u003c\/em\u003e\u003c\/strong\u003e\u003cspan lang=\"EN-US\"\u003eThe Carbon Tapes are also used on the bottom of the surfboards to create additional spring or pop out of the board. This is know as a kinetic flex, as the board is place under pressure while in transition, during or out of a turn the board springs back to its natural curvature and delivers additional speed.\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003e\u003cem\u003e\u003cspan lang=\"EN-US\"\u003eFull Rail of the board \u003c\/span\u003e\u003c\/em\u003e\u003c\/strong\u003e\u003cspan lang=\"EN-US\"\u003eThe Carbon Tapes are often used along the full length of the surfboard rail with stringerless surfboards. This is to add additional strength or to replace the strength that a timber stringer would provide, therefore creating a Parabolic Frame. The Parabolic Frame helps prevents the board from twisting which increases the liveliness\/responsiveness, this also creates a parabolic flex pattern that allows to board to deliver more drive, speed and power.\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003e\u003cspan lang=\"EN-US\"\u003eLay-ups: \u003c\/span\u003e\u003c\/strong\u003e\u003cspan lang=\"EN-US\"\u003eThe Carbon Tapes are used during the lamination process. The tapes are place on the foam before the cloth is laminated. Most manufactures mark the area they wish to place the Carbon Tapes, and brush a small amount of resin on the foam (to prevent to the Carbon Tapes from moving). The Carbon Tapes are then placed on the resin (making sure the resin has soaked through) and then continue to lay the cloth over the board and laminate as normal. \u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eResin Compatibility: \u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eShapers Unidirectional Carbon Tapes are compatible with both Epoxy and Polyester Resin. \u003c\/span\u003e\u003c\/p\u003e","brand":"SHAPERS - BALI","offers":[{"title":"Default Title","offer_id":47422820942044,"sku":"15-30-030-R","price":1650000.0,"currency_code":"IDR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0697\/0268\/0796\/files\/15-30-030.jpg?v=1767680162","url":"https:\/\/shapers.id\/products\/uni-carbon-fibre-30mm-1","provider":"SHAPERS - BALI","version":"1.0","type":"link"}