Articles

21 August 2026

Surfboard Rocker For Anyone Shaping Their First Board

Shaping your first board? Surfboard rocker is the curve that decides how it rides. Nose lift saves you from pearling, tail lift lets you ...

Read more

21 August 2026

Choosing The Right Fins For A Longboard

Loose and classic, or driven and grippy. Longboard fins set the feel of a log, and choosing between a single fin and a 2+1 is simpler tha...

Read more

21 August 2026

The Surfboard Glassing Supplies Every First Board Needs

The moment the hardener goes into the resin, the clock starts. From that point, you have a limited window to wet out the cloth, work it f...

Read more

21 August 2026

How to Laminate a Surfboard by Hand

A shaped blank is only a promise. Lamination is the stage where it becomes a surfboard, as fibreglass cloth and resin wrap around the foa...

Read more

21 August 2026

The Difference Between PU and EPS Surfboard Blanks

Two foams build almost every board, and only one is on the rack here. This is how PU and EPS surfboard blanks actually differ in weight, ...

Read more

21 August 2026

How To Install Fin Boxes Into A Board

Getting a fin into a box is easy. Glassing the box in straight is what holds it there for years. This is how to install fin boxes without...

Read more

21 August 2026

How To Choose The Right Surfboard Blank

Foam comes off the block and never goes back, so the right surfboard blank is the one build decision you cannot undo. Here is how to choo...

Read more

21 August 2026

A Guide To Fin Boxes And Fin Plugs

The fin box is the fitting glassed into your board that every fin drops into. Here is how single-tab, dual-tab, and US box systems differ...

Read more

11 August 2026

How To Install Surfboard Fins

Installing surfboard fins is quick once you know the steps. Here is a walkthrough for screw-in systems and tool-free systems, plus what t...

Read more